Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Wiper arm right side
Bug (Type 1); -57
This is the left wiper arm. It is the arm only. From the factory the blade was made into the arm. This arm takes a screw on blade. See part number 113955425 for the blades that screw on. We no longer have the factory style.
No customer reviews for the moment.
Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 311837658A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 144867501
This is the vinyl covering for the inside roof and sides of the Ghia.
Application:Part #: 155871401
This is what holds the top closed.
Application:Part #: 6957351A
These lights let you know what's on or happening with various parts of your car..
Application:Part #: 251905855
On the back of the switch, you'll normally see three numbers.
Application:Part #: 211837205D
These are the front door handles.
Application:Part #: 113707134A
These brackets hold the bumpers on.
Application:Part #: 211801561Z
Rear Wheel Well Front Repair Section, Left
Application:Part #: 211953162B
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 1905250
This chrome clamp holds the distributor in time, as well as holding it onto the case.
Application:Part #: 141871034
This is the outer skin on your convertible.
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:
Wiper arm right side
