Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These pans will replace those rusted out parts of the front or rear floors.
These pans will replace those rusted out parts of the front or rear floors. They need to be welded in place, which is quite a bit of work but well worth it. If both the front and the rear are rusted out completely out check FLOOR PAN HALVES.
Bug (Type 1): All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111813165
Engine Compartment Shelf, Left
Application:Part #: 152701062Q
Floor Plate, Right, Convertible
Application:Part #: 113821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 111805501B
This clip goes back to the gas tank area.
Application:Part #: 111813117B
Luggage Shelf Repair Section
Application:Part #: 111809085CC
Rear Shock Tower Area
Application:Part #: 111801045D
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 111813151B
Rear Lower Firewall, Left
Application:Part #: 111827025AD
This is the lid that covers the engine.
Application:Part #: 111898051
Fender Hardware Kit
Application:Part #: 111809201BX
Front Portion, Side Panel
Application:Part #: 111821022M
These new front fenders are not as thick as the original German fenders.
Application:Part #: 112701062K
Floor Plate, Right
Application:Part #: 111813301J
The rear apron is the panel between the rear fenders.
Application:Part #: 111801041CX
Inner Rocker Panel Left
Application:
These pans will replace those rusted out parts of the front or rear floors.