Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These new front fenders are not as thick as the original German fenders.
These new front fenders are not as thick as the original German fenders. On Bugs up to 1957, you will need to weld the bullet front turn signal bases from your old fenders to the new ones. The fenders will ship freight and usually gets damaged in transit.
Bug (Type 1): 67
No customer reviews for the moment.
Part #: 111801045D
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 111809085CB
Fastening Panel, Rear Fender
Application:Part #: 133821022
These new front fenders are not as thick as the original German fenders.
Application:Part #: 151701061Q
Floor Plate, Left, Convertible only
Application:Part #: 133821021
These new front fenders are not as thick as the original German fenders.
Application:Part #: 111809201AX
Front Portion, Side Panel
Application:Part #: 151701061M
Floor Plate, Left, Convertible only
Application:Part #: 111801171C
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 151801131B
These are the replacement rails for convertibles.
Application:Part #: 111809085CE
Rear Shock Tower Area
Application:Part #: 111809085CC
Rear Shock Tower Area
Application:Part #: 111701061B
Floor Plate, Left
Application:Part #: 113821022M
These new front fenders are not as thick as the original German fenders.
Application:Part #: 152701062Q
Floor Plate, Right, Convertible
Application:Part #: 112701062Q
Floor Plate, Right
Application:Part #: 111813165
Engine Compartment Shelf, Left
Application:
These new front fenders are not as thick as the original German fenders.