Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the padding that sits on top of the springs of the seat.
This is the padding that sits on top of the springs of the seat. It's made out of foam, not horse hair like the original padding. Before we lay the padding down, we take a chunk of old carpet and lay it face down on the springs. Then we place the pad on top of the carpet. This keeps the springs from chewing up the pad. If you are ordering seat covers, it's a good idea to check your padding. Brought to you proudly by TMI.
No customer reviews for the moment.
Part #: 211881865A
Rubber stops that the front seats rest on.
Application:Part #: 211883369
This is the padding that sits on top of the springs of the seat.
Application:Part #: 221801419
Middle and Rear Seat Mount Bracket, Weld in
Application:Part #: 211881897
Front Seat Rubber Stop, Bottom Section, 4 per bus required
Application:Part #: 261881369
This is the padding that sits on top of the springs of the seat.
Application:Part #: 211867765A
Seat Stand Surround mats, Wraps around the sides and back of Seat Pedestal
Application:Part #: 241885000
Rear Seat Support Bar, Clamps and bar
Application:Part #: 2881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 221883419
Middle Seat Floor Mount Reinforcement Plate, Welds onto floor and supplies support for mount
Application:Part #: 261881404
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 111881360
Sisel Padding, 28" x 6' per sheet.
Application:Part #: N119761
Rear Seat Bar Screws, 6 required
Application:Part #: 2881406CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 111881281
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 221883861A
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:
This is the padding that sits on top of the springs of the seat.