Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Due to the core shortage we will need you to send in your old steering box first.
Core charge for 55-67 Steering Box
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be a “ZF” or “ATE” box. We cannot use any other cores, so please check that you have a rebuildable box before sending. We will call you after we have received and reviewed your core. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 2415653EMP
Wood Steering wheel with polished Chrome 3 spoke design, 457mm (18") diameter 31mm(1.25") grip width
Application:Part #: 211415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: N127071
Steering Wheel To Steering Shaft Retaining Key Bus (Type 2): -67
Application:Part #: 211415701D
This rod goes between the steering box and the center pin.
Application:Part #: 2415056
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 1415811
This kit allows you to drill out your tie rod end holes and flip your tie rod end over, giving you a better tie rod angle.
Application:Part #: 211415801D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: N125381
Cotter Pin, Steering Box to Pitman Arm
Application:Part #: 2415057
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 113415431
Steering Coupler Lock Nut (5 Required)
Application:Part #: 211415801F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 211415585
Upper Steering Column Bearing with Replacement Spring
Application:Part #: 311415812C
These are the ball joints on the tie rods.
Application:Part #: 211415049HCO
CORE CHARGE If you would like to order this before sending your old steering box in, please add this part number to your order. This is the core charge. Once you send back your old steering box we will refund this amount, providing your steering box is good.
Application:Part #: 141561411
Beautiful Classic Dark Wood with Polished chrome Spokes, Thin Grip
Application:Part #: 211425021ABR
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:
Due to the core shortage we will need you to send in your old steering box first.
