Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These systems work well with a single carb set up as they have provisions for the heat riser.
These systems work well with a single carb set up as they have provisions for the heat riser. The collector is the most important part of a header. You want a four into one system for best performance along with a single quite muffler. If you are running heater boxes check out the header flange kit.
Off-Road: All
No customer reviews for the moment.
Part #: 6251005BENDC
Pipe Bend Muffler to Header, Ceramic Coated
Application:Part #: 6251014B
Off-Road Competition exhaust systems with stainless steel mufflers.
Application:Part #: 6251014C
Off-Road Copetition exhaust systems with stainless steel mufflers.
Application:Part #: 1251210S
6 Point 8mm-1.25 thread Engine Nuts, Uses 10mm Wrench
Application:Part #: 1251261C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 6251022
Buggy Dual Exhaust with Chrome Tips, Without Heater Box
Application:Part #: 6251005BEND
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 6251205
2 Bolt Header Gaskets (Pair)
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 111298051GR
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 6251009
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 6251015CC
Off-Road Competition exhaust systems with stainless steel mufflers.
Application:Part #: 6251014M
SS Racing Muffler Only with Mounting Clamps
Application:Part #: 1251203
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 1256091
J-Tubes, replace stock heater boxes, eliminates heater and saves weight, come with gaskets, sold in pairs
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
These systems work well with a single carb set up as they have provisions for the heat riser.
