Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the 3-bolt gasket that goes between the muffler and the header.
This is the 3-bolt gasket that goes between the muffler and the header. Hint: The bolts tend to come loose after they heat up the first time. Therefore, after you replace the gasket, drive the car for a day and tighten the bolts again.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: 1251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 111251261B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251008H
1 5/8" Merged Flanged Header with Stinger (No Heater Boxes Included)
Application:Part #: 1251163
These fit all stock mufflers and come in three different styles..
Application:Part #: 1251009
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251262
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251010CC
Hide Out Muffler Ceramic Coated
Application:Part #: 1251201CH
Chrome Heat Riser Block-Off Plate Kit
Application:Part #: 125121112
Exhaust nuts 12 Point 8mm-1.25, use 10mm 12 point socket (8 per kit)
Application:Part #: 1251014SS
Stainless Steel Phat Boy Muffler for Merged Exhaust
Application:Part #: 1256092
Also called J-tubes, these tubes fit most header systems and replace the stock heater boxes, so you will lose your heat and defroster..
Application:Part #: 1251159
Black Street Stinger with swivel flange
Application:Part #: 1251167
These fit all stock mufflers and come in three different styles..
Application:Part #: 1251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:
This is the 3-bolt gasket that goes between the muffler and the header.
