Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit is made to weld onto your stock arms to beef them up.
This kit is made to weld onto your stock arms to beef them up. It's a major plus for keeping your arms from bending. The only draw back is they are made so you have to remove the stock shock boss, so you'll need to look into shock mounts, part #6513030.
Off-Road: IRS
No customer reviews for the moment.
Part #: 930332034
This joint allows the axle to move up and down and turn on IRS cars.
Application:Part #: 6501229A
These are hardened aircraft quality CV joint bolts.
Application:Part #: 1511221
Torsion Tube End Plates, Inner, Pair
Application:Part #: 2517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 6511243
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 6501149108K
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 181517283A
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 6501201
15 5/8" Axles for Type 2 trans with Type 1 and 2 Joints
Application:Part #: 1517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 6511246
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 6501149108F
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 6501204
IRS Axles for Type 2 Transmissions with 930 CV Joints or 3x3 Arms, Sold as a Pair
Application:Part #: 1511241
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 6501331HK
Porsche Style Lightened 930 CV Joint 108mm OD, .875" Balls, Chromoly, boot, and Flange
Application:Part #: 1501201BCH
Hi-Performance Swing Axle, 28 7/16" long (Each)
Application:Part #: 6501206IRS
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:
This kit is made to weld onto your stock arms to beef them up.
