Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Billet Aluminum Bearing Cap, Each
Billet Aluminum Bearing Cap, Each
Offroad/Race: IRS
No customer reviews for the moment.
Part #: 211863011
These are the interior panels.
Application:Part #: 151863706
This is a full carpet kit.
Application:Part #: 251419803
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 1721362
Bolt-on Bowden Bracket, Zinc, Swing Axle + IRS
Application:Part #: 211945355
When you apply the brakes, the brake light switch activates the brake lights.
Application:Part #: 211809311
Upright Repair Section, Lower 300mm tall (11.81")
Application:Part #: 113823731BGR
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 211885805
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 042903109AGR
VW Generator Pulley, 6V
Application:Part #: 141971116
The electrical harness runs everything on the car.
Application:Part #: 113251053AJ
This is the exhaust silencer.
Application:Part #: 311251061F
This is the exhaust silencer.
Application:Part #: 111109325
Push Rod Guide, 25-36 HP, Each
Application:Part #: 111881372
This is the padding that sits on top of the springs of the seat.
Application:Part #: 1847100CWG
This Bug Safari window is constructed as a dual-channel, mild-steel frame with a chrome finish that accepts 3/16" safety glass and an outer lip seal. This chrome options arrives pre-assembled
Application:Part #: 1498050A
Press in Link Pin Bushings 7/8" (Set of 4)
Application:
Billet Aluminum Bearing Cap, Each
