Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These mounts are made to get more than one shock on the back or your car.
These mounts are made to get more than one shock on the back or your car. The IRS kit is made to go with the IRS arm beef kit and will take some welding. You will also need shock bosses for the IRS kit. The swing kit just bolts onto the axle tube. Both kits will require you to relocate your upper shock mounts.
Off-Road: IRS
No customer reviews for the moment.
Part #: 1501191RD
This urethane snubber keeps the rear suspension from bottoming out hard.
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 6501200L
Replacement Spiral Locks for 930, Set of 4
Application:Part #: 6501229BEL
CV Bolts for 930 CVs, 3/8"-24 Thread, 2 5/16" Long, Set of 6
Application:Part #: 2517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 181517283A
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 6501149100K
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 6501149100F
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 1517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 930332034
This joint allows the axle to move up and down and turn on IRS cars.
Application:Part #: 6501149100B
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 1598021BL
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 6501201
15 5/8" Axles for Type 2 trans with Type 1 and 2 Joints
Application:Part #: 6501263
These stub axles will convert your CV joints to Bus or 930 joints.
Application:Part #: 6501282
Chrome Steel IRS Axle Bearing Cap, Pair
Application:
These mounts are made to get more than one shock on the back or your car.
