Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is what gets smashed up first in an accident.
This is what gets smashed up first in an accident. For Buses and Bugs up to 1967, American style bumpers have tubing on the top that tie into the bumper guards. The 1967 and earlier Euro blades have no holes for tubing. Bumpers for Bugs 1968 and later are blade style only.
Bug (Type 1): 68-73
No customer reviews for the moment.
Part #: 113707191C
This special chrome bolt has a round head on it.
Application:Part #: 113707133A
These brackets hold the bumpers on.
Application:Part #: 113707134A
These brackets hold the bumpers on.
Application:Part #: 113707904
This bracket holds the license plate to the car.
Application:Part #: 211827905
This bracket holds the license plate to the car.
Application:Part #: 111707197B
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 113707201B
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 113707156
Chrome Bumper Guards with Impact Strip
Application:Part #: 113707156A
Chrome Bumper Guards without Impact Strip
Application:Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 113827903
This bracket holds the license plate to the car.
Application:Part #: 113707233WW
Bumper Support
Application:Part #: 111707111
Front Bumper Bar, Bare Steel
Application:Part #: 111707197B
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 111809085B
Rear Bumper Mount, Left
Application:Part #: 111707121A
Bumper Bracket w/ light mounting point
Application:Part #: 1707135ACH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 133807332
Right rear bumper shock
Application:Part #: 113707201B
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 113707156A
Chrome Bumper Guards without Impact Strip
Application:Part #: 1707134R
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 113798073BQ
This is what gets smashed up first in an accident.
Application:Part #: 1707302
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 113707111B
This is what gets smashed up first in an accident.
Application:Part #: 133807397
These grommets go on the fenders or the body where the bumper brackets go through..
Application:
This is what gets smashed up first in an accident.