Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Chrome Bumper Guards with Impact Strip
Chrome Bumper Guards with Impact Strip. Groove in center of Guard cut out for Impact Strip
Bug (Type 1): 68-73
No customer reviews for the moment.
Part #: 311867500
This is the vinyl covering for the inside roof and sides of the Square Back.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1198162TS
92mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 141853335A
The front door window rolls up and down between these two rubber seals.
Application:Part #: 111823461
This handle is on end of the cable that releases the gas door.
Application:Part #: 111198157A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1105305
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 144863703
This is a full carpet kit.
Application:Part #: 211837295D
The striker is what keeps the door closed, an absolute necessary part to say the least.
Application:Part #: N122311
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111413403A
Shock Absorber Bolt
Application:Part #: 211847495W
Safari Rivet with Flex Washer
Application:Part #: 1401061A
2" Narrowed Beam with Ratchet Style Adjusters, Link Pin
Application:Part #: 6251005BENDC
Pipe Bend Muffler to Header, Ceramic Coated
Application:Part #: 113837640AHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:
Chrome Bumper Guards with Impact Strip
