Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
We have found this kit to be a good, cheap dual carb kit for a stock motor.
We have found this kit to be a good, cheap dual carb kit for a stock motor. Throttle bushings wearing out over time is the only bad thing we can say about them. We suggest you change the fuel hose in the kit to German hose. *Part numbers ending in an E are reproductions of Weber Carb Kits by Empi.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing: 1600
Off-Road: 1600
No customer reviews for the moment.
Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129199150
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.50mm
Application:Part #: 113129027EMP
This is what delivers gas and air to the engine.
Application:Part #: 1129511A
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: 1129324
These are some of the most common jets used.
Application:Part #: 1129305040
These are some of the most common jets used. Sold in pairs.
Application:Part #: 1129511
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 112950508IDA
Auxiliary Venturi
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129506PRO
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair Inside Diameter is 3.850"
Application:Part #: 112950501IDA
48 IDA Air Fuel Mixture Screw and Spring
Application:Part #: 1129201200
These are some of the most common jets used.
Application:Part #: 112950504IDF
Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:
We have found this kit to be a good, cheap dual carb kit for a stock motor.
