Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used. Sold in pairs.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold in pairs.
No customer reviews for the moment.
Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129802
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1198578
This kit has the gaskets, o-rings, accelerator pump and needle and seat to rebuild an IDF carb.
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: 113129415B
Here are some of the replacement parts for your stock carburetor. Sold individually.
Application:Part #: 111129405C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129505002
These are some of the most common jets used.
Application:Part #: 113129027H
This is what delivers gas and air to the engine.
Application:Part #: 1129139
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129310
Empi Idle Jet Vent Tube Kit
Application:Part #: 1129517
Linkage Ball End Bushings, Pair
Application:Part #: 112950503IDA
Fast Idle Screw and Spring
Application:Part #: 1129040E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 112950502IDA
Stack Hold Down Screw and Washer
Application:Part #: 1129515PR
Linkage Down Rod Extensions, Short & Long, Pair
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:
These are some of the most common jets used. Sold in pairs.
