Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair
Bug (Type 1): IDF/EPC
Bus (Type 2): IDF/EPC
Type 3: IDF/EPC
Ghia: IDF/EPC
Thing: IDF/EPC
Offroad/Race: IDF/EPC
No customer reviews for the moment.
Part #: 2109001
T4 Camshaft Gear, Bolt On
Application:Part #: 113957809A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 211841081G
Cargo Door Skin, Lower Front to Waistline
Application:Part #: 211405631
Front Bearing Spacer (1 per side)
Application:Part #: 1109400
This kit eliminates the clips and spring washers in a rocker shaft set up.
Application:Part #: 113885553
These are the stops that the back of the rear seat rests on.
Application:Part #: 113827503A
This is the rear handle that opens the engine lid.
Application:Part #: 1119025BKS
Super Shroud, Dog house oil cooler style, with heater ducts, black
Application:Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: 113721221
Brake Pedal Push-Rod Lock Tab
Application:Part #: 111971225
This cable goes from the battery to the starter.
Application:Part #: 021256251A
Gasket
Application:Part #: 211255723C
Heater Tube Insulating Cover, Center Section
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: 311721509A
This will replace a worn out pivot for the stock accelerator assembly, to replace this pivot you will have to remove the whole pedal assembly.Make sure you use some white grease on the pin where it mounts to the pedal to insure that it lasts longer..
Application:
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair