Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This bow goes into the metal frame of the rear window.
This bow goes into the metal frame of the rear window. The convertible top fastens to it. Plastic bows are available, but we carry the quality synthetic-wood bows because the top tacks better to them than plastic and they don't rot. Note: Measurements are taken from extreme outside edge to the extreme outside edge of the frame.
Bug (Type 1): 64-75 1/2
No customer reviews for the moment.
Part #: 151871189F
The top staples to this front bow.
Application:Part #: 151871031
This is the outer skin on your convertible.
Application:Part #: 151871349B
This sels the leading edge of the top to the front window frame..
Application:Part #: 151837628A
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 155871971A
These wires keep the top taught when the top is up.
Application:Part #: 151871196A
This is the pad between the top material and the headliner.
Application:Part #: 151871046C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 151871049C
This is what you see whey you look up at the header bow.
Application:Part #: 151871375
Convertible Top Latch Hook
Application:Part #: 151837627B
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 151871415
Main Bow Top Seal to Body, Left
Application:Part #: 155871953A
These wires keep the top taught when the top is up.
Application:Part #: 151871030
This is the outer skin on your convertible.
Application:Part #: 151871041C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 151871100A
Convertible Top Frame Butt Plates
Application:Part #: 151871353A
This seal goes on the windshield post to seal the vent wing.
Application: