Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): 68-79
No customer reviews for the moment.
Part #: 265809041A
Side Panel, Crew Cab Only, Left
Application:Part #: 3251001
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 133201179
Fuel Elbow, "T" to Filler Neck
Application:Part #: 113941541IV
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 1119024
Remote coil mounts are used when you want to keep the coil on the motor, yet out of the way of down linkage on dual carburetors..
Application:Part #: 211898003
Bus Ignition, 2 front locking door handles, and cargo door (Not Panel) all keyed alike, only 2 keys included!
Application:Part #: 6251009
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 16010615
Empi Gasser, 5x130, 15x5.5"
Application:Part #: 1109401125SC
1.25 Ratio Rockers Pro SCAT
Application:Part #: 2863620W
This handy basket hangs from the vent slots to allow you to finally have the cup holder you've always dreamed of. The front spring loaded pocket is a nice place to store your cell phone, or maybe to hold your registration for when the cops pull you over for going too slow. Available in black and white.
Application:Part #: 112920542
42mm Main Venturi for EPC 48/51, 48IDA
Application:Part #: 2498211C
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones...
Application:Part #: 111845101K
These are cut from safety glass as required by law.
Application:Part #: 265809591
Intermediate Rocker Panel Goes between Inner and Outer Rocker as a Reinforcement
Application:Part #: 112950504IDF
Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 021101417A
Exhaust Valve Guide
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
