Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the pins that go into rod that stops to prevent you from opening the doors too far.
These are the stops on the check rods that prevent you from opening the doors too far. They're especially nice on windy days because they keep your doors from being sprung. If you have one piece windows on a bug, the stock stops will not work. Look into CAL-LOOK STOPS. Sold each
No customer reviews for the moment.
Part #: 111831721DGR
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 111831721DBR
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 151831449BK
These plastic plugs hide the door hinge screws.
Application:Part #: 111831722AGR
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 111831421DOS
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 1837249
Door stops are used with one piece-windows, they replace the check rod and stops that are removed for the installation of the windows.
Application:Part #: 1837201
This guard goes underneath the door handle to keep your fingernails from scratching the paint.
Application:Part #: 111831721ABR
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 111837417
Window guide channel at the rear of the door, Left side
Application:Part #: N120611
Clip, Secures Rear Metal Channel to Door
Application:Part #: 1837187
If your original door lock pulls are broken or faded, these are very nice replacements.
Application:Part #: 151831721A
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 111837277
These wedges align the door so the door latch and striker line up as you close the door.
Application:Part #: 151831722A
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 111837685
Vent wing tension clamp, each
Application:
These are the pins that go into rod that stops to prevent you from opening the doors too far.