Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a great way to quiet your car down.
This is a great way to quiet your car down. To install, you will need to pull the engine out, and take out the rest of the old insulation. Next use a pair of pliers and straighten out all the sharp metal hooks. Install the sides, then very carefully install the middle. As you push it into place the hooks will pierce the insulation. Once you have them flat, use your pliers and bend the sharp ends back towards the front of the car. Use a hammer and bend them flat once you have the point turned around.
Bug (Type 1): All
No customer reviews for the moment.
Part #: 133813705
This seal goes between the body and the engine.
Application:Part #: 111827301
Engine Deck Lid Hinge
Application:Part #: 1827705
Just like the front mexican style seal, this seal clips to the deck lid instead of the body..
Application:Part #: 111813705D
This seal goes between the body and the engine.
Application:Part #: 1813113A
This is a aluminum firewall that dresses up your engine compartment.
Application:Part #: 1827151
These brackets, that the hinges mount to in the engine compartment area, are a nice way to dress it up..
Application:Part #: 111827171
These threaded straps hold the deck lid hinge mounts to the body.
Application:Part #: 211827345
Engine Deck Lid Prop Bolt
Application:Part #: 111827329
Engine Deck Lid Spring CHROME
Application:Part #: 111827110
These plug two of the three holes in the rear apron.
Application:Part #: 1827152A
Billet Aluminum Deck Lid Stand-Offs
Application:Part #: 1827152
These are a must if you live in an area were the temperature reaches 100 degrees or more.
Application:Part #: 113827902A
License Plate mounting Bracket, Rear
Application:Part #: 131823499
This is the rubber stop in the rear apron that the deck lid sets on.
Application:Part #: 111827581
This is the seal that goes under the deck lid handle..
Application:Part #: 1827329
This spring replaces the stock spring you might have thrown away when you put the deck lid stand offs on.
Application:
This is a great way to quiet your car down.
