Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This polished stainless steel firewall dresses up your engine compartment.
This polished stainless steel firewall dresses up your engine compartment. We like to run insulation behind these firewalls because it helps to quiet the engine noise. The white side goes out. Once installed, remove the white protective coating covering the stainless steel. Note: Take your rear bellhousing engine tin and trace it onto the bottom of the new firewall, and then cut it out. This will allow the engine to go in easier. Be careful, the metal is sharp.
Bug (Type 1): All
No customer reviews for the moment.
Part #: 111813311
Channel, Hood and Engine Weatherstrip, 43" Length
Application:Part #: 1813115
Stainless Steel Carb Windows
Application:Bug (Type 1); All
Part #: 111813741G
This seal goes between the body and the engine.
Application:Part #: 111827527
This is the plug in the center of the apron.
Application:Part #: 113827906
License Plate Bracket, Rear
Application:Part #: 1827331
This extension allows you to run the deck lid spring when using the deck lid stand offs..
Application:Part #: 111827171
These threaded straps hold the deck lid hinge mounts to the body.
Application:Part #: 111827329
Engine Deck Lid Spring CHROME
Application:Part #: 113827902A
License Plate mounting Bracket, Rear
Application:Part #: 111827110
These plug two of the three holes in the rear apron.
Application:Part #: 131823499
This is the rubber stop in the rear apron that the deck lid sets on.
Application:Part #: 1827151
These brackets, that the hinges mount to in the engine compartment area, are a nice way to dress it up..
Application:Part #: 111827331A
Engine Deck Lid Spring
Application:Part #: 211827345
Engine Deck Lid Prop Bolt
Application:Part #: 1827153
Looking for quick access to your engine, quick release pins are the answer.
Application:Part #: 1827152
These are a must if you live in an area were the temperature reaches 100 degrees or more.
Application:
This polished stainless steel firewall dresses up your engine compartment.
