Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This aluminum clamp holds the distributor in time, as well as holding it onto the case.
This aluminum clamp holds the distributor in time, as well as holding it onto the case. When it's bolted down it should sit flat to the case. This adds a "hi-tech" look to your engine.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 03001
These are the parts found in the distributor.
Application:Part #: 03214
These are the parts found in the distributor.
Application:Part #: NGK B5HS
When replacing these use anti-seize on the threads. NGK B5HS is direct swap for this Bosch W8AC Plug
Application:Part #: 1905530
The points we get today, aren't what they used to be, so the Compufire is the best way to go.
Application:Part #: 04038
These are the parts found in the distributor.
Application:Part #: 1905451YL
This is a good way to keep your spark plug wires separated.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 02006
These are the parts found in the distributor.
Application:Part #: 1905531TA
This ignition system eliminates points, rotor, condenser and even the cap.
Application:Part #: 01006
These are the parts found in the distributor.
Application:Part #: 1905531BL
This ignition system eliminates points, rotor, condenser and even the cap.
Application:Part #: W7CC
When replacing these use anti-seize on the threads.
Application:Part #: 01011
These are the parts found in the distributor. These are not Bosch as Bosch doesn't make them anymore. These are german made
Application:Part #: 1905451RD
This is a good way to keep your spark plug wires separated.
Application:Part #: 113035255A
The plug wires run from the distributor cap to the spark plugs and coil.
Application:Part #: NGK D9EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:
This aluminum clamp holds the distributor in time, as well as holding it onto the case.
