Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you want a keyed ignition switch for you buggy or tube car, here you go.
If you want a keyed ignition switch for you buggy or tube car, here you go. It mounts by drilling a hole and threading a collar on the end. This switch has an accessory position.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1905451CH
This is a good way to keep your spark plug wires separated.
Application:Part #: 04030
These are the parts found in the distributor. Bosch no longer makes this rotor, we can get them but they are not Bosch
Application:Part #: NGK D9EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 113035255A
The plug wires run from the distributor cap to the spark plugs and coil.
Application:Part #: 1905531YL
This ignition system eliminates points, rotor, condenser and even the cap.
Application:Part #: 02086
These are the parts found in the distributor.
Application:Part #: 1905530P
Pertronix Electric Ignition for 009 Distributor
Application:Part #: 00012
At this time we have a very limited stock on these. so one per customer only.
Application:Part #: 04016
These are the parts found in the distributor.
Application:Part #: 113905451
These plastic plugs go into the fan shroud to hold the spark plug wires off the block and heat risers.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 1B03010CL
These caps look cool and come in different colors, but that's the only good thing we can say about them.
Application:Part #: 04170
These are the parts found in the distributor.
Application:Part #: 02006
These are the parts found in the distributor.
Application:Part #: W8CC
When replacing these use anti-seize on the threads.
Application:Part #: 04008
These are the parts found in the distributor.
Application:
If you want a keyed ignition switch for you buggy or tube car, here you go.
