Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the beading that goes between the fender and the body.
This is the beading that goes between the fender and the body. The best way to install the beading is to loosely bolt the fender on, leaving a gap so you can get the fender beading started. Slip the beading into place and pre-fit to make sure all the holes line up and that the beading sits correctly. With the beading in place, start on one end and push it down and tighten the fender bolts one at a time.
Bug (Type 1): All
No customer reviews for the moment.
Part #: 111821509BGR
The running boards go between the fenders on each side of the car.
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 133853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 113819448
This is the crescent shaped grill that goes behind the quarter windows.
Application:Part #: 133853325D
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113853559B
These are the clips that hold the various chrome moldings on.
Application:Part #: 113853325B
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113853601A
Front Hood Emblem
Application:Part #: 1821531SL
There are two styles of stainless steel running boards, smooth and louvered.
Application:Part #: 113853505CSL
Front Hood Molding
Application:Part #: 111821531A
Running Board Material, Left
Application:Part #: 113853505H
This is the front strip that goes down the front hood.
Application:Part #: 113853687K
Volkswagen Engine Decklid Emblem
Application:Part #: 111821707BTQ
This is the beading that goes between the fender and the body.
Application:Part #: 1821531BGB
Billet Look Running Boards, Gloss Black/Polished Ribs, Pair
Application:Part #: 111821715AOE
This is the beading that goes between the fender and the body.
Application:
This is the beading that goes between the fender and the body.
