Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Crest Seals, Set of 2
Crest Seals, Set of 2
Bug (Type 1): 51-63
No customer reviews for the moment.
Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 111955993WW
Washer Jet Chrome Head includes Seal
Application:Part #: 211809324
C-Post Repair Section, Inner, Right 370mm tall (14.6 inches)
Application:Part #: 211863711D
This rubber mat goes on the front floor.
Application:Part #: 155871971A
These wires keep the top taught when the top is up.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 025198465BR
Main Bearing Set .020 - STD - STD
Application:Part #: 211945363A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: WG333959
2 1/16" Tach. AVAILABLE NOW
Application:Part #: 111971119
The electrical harness runs everything on the car.
Application:Part #: 211837626
Vent wing seals on the front doors keep out the elements.
Application:Part #: 111721329
Clutch Pedal Shaft Bracket
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: N130101
Overhead Air Vent Shutter Set Screw and Lock Nut
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:
Crest Seals, Set of 2