Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the gasket that goes around the floor pan between the body and the pan.
This is the gasket that goes around the floor pan between the body and the pan. To install it, the body has to be off the pan. It was originally nailed in place and we suggest you keep the old nails. Take the new gasket and nail it down to the pan and then take a punch (a leather punch works best) and punch the gasket where all the bolts go through. We also suggest you silicone the rubber together at the seams.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111899117
Body Pad (2), Under Rear Seat
Application:Part #: 111899155
Chassis to Body Bolt Plate, each
Application:Part #: 6405127
Urethane 2" Long Bump Stops for 1.5" Tube
Application:Part #: 6701040
3" Body Lift Kit for Bajas and Buggies Shipped by Freight only or Will call pick up!
Application:Part #: 133411315
Sway Bar Bushing, Rear
Application:Part #: 133701571
Front inspection seal
Application:Part #: 111899117B
This is a little square pad that goes on the torsion housing where the body mounts.
Application:Part #: 111801201
Leftside Rear Cross Member
Application:Part #: 111899119B
Body Pad (2), Rear Shock Tower
Application:Part #: 111898061
This kit comes with bolts and brakets to attach the floor pan to the body for one side.
Application:Part #: 111598001
Z Bar Bushing Kit
Application:Part #: 113701037K
Frame Head Super Beetle Only
Application:Part #: 113701571A
This seal goes around the plate that's between the front end tubes.
Application:Part #: 113701037G
This is the front part of the floor pan where the front end mounts.
Application:Part #: 133701500
"Napoleon Hat" Center front Chassis Support Super Beetle only
Application:Part #: 113701571
This seal goes around the plate that's between the front end tubes.
Application:
This is the gasket that goes around the floor pan between the body and the pan.