Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Leftside Rear Cross Member
Leftside Rear Cross Member, made from original thickness. Will fit 65-67 need to modify heater hole shape.
Bug (Type 1): -64
Offroad: -64
No customer reviews for the moment.
Part #: 30048
This little box tells the Alternator what to do.
Application:Part #: 1615124A
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 001301083B
This seal keeps the fluid in the converter.
Application:Part #: 025115431
Oil Pressure Relief Valve Screw
Application:Part #: 151871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: 111998161A
The wiper arms are connected to these shafts.
Application:Part #: 311953157J
Amber Turn Signal Lens
Application:Part #: 113251263
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 111863410
This carpets the area behind the rear seat.
Application:Part #: 211698001
Metal Brake Line kit
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 1129039
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1401022
If the front end of your car sits further down then the rear end, caster shims will help by pushing out the bottom of the beam.
Application:Part #: 2251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113863402
This is a full carpet kit.
Application:
Leftside Rear Cross Member