Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This pin and its bushings are housed on the front side of the front axle beam in a box. To check for wear, have a friend turn the steering wheel back and forth while you place your hand on the top of the arm that is attached on the pin. If you feel the arm moving up and down before it spins then it needs to be replaced. On buses up to 1967 the new bushing will need to be reamed to size, once installed. We can rent you a tool that makes this job real easy on all busses to 1979. Note: If you are going to install these with out the tool it is very important that the bottom bushing be pressed in flush and the top bushing stick out .040".
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 265809074
Crew Cab Rocker Panel, Right Side
Application:Part #: 113857511L
This is the mirrior you look at to see how fast that mack truck is coming up on you.
Application:Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 211837015F
Door lock mechanism.
Application:Part #: 111863708
This is a full carpet kit.
Application:Part #: 151871030
This is the outer skin on your convertible.
Application:Part #: 021129707D
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 113415607B
Steering Shaft Rubber Mount
Application:Part #: 1101473OR
These covers look good but have a tendency to leak.
Part #: 68012004
Set of 4 Universal Mounting Tabs with 1/2" hole
Application:Part #: 1609721LON
This kit allows you to run disc brakes in the rear.
Application:Part #: 141707137D
Front Bumper Bracket Seal Left
Application:KG; 72-74
Part #: 6857700
It's the law and besides you really do want a good set of seat belts if you going to be out playing..
Application:Part #: 1881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 022129707F
The Intake Manifold Gasket (2 are required per engine).
Application: