Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the belt that turns the generator.
This is the belt that turns the generator. We found German belts are the only belts with the correct width. Wider belts tend to ruin the generator pulley. Note: See GENERATOR PULLEY for instructions. Make sure you always carry a spare belt and the tools to change it.
Bug (Type 1): 1300-1600
Bus (Type 2): 1300-1600
Ghia: 1300-1600
Thing: 1300-1600
Race/Off-Road: 1300-1600
No customer reviews for the moment.
Part #: 1903184
Nut for Billet Pulley Only
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 113903141A
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 111119123A
Cooling Fan Hub
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: SR17XCO
This is what starts the car.
Application:Part #: 111903181
Generator Pulley Nut
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:
This is the belt that turns the generator.