Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This tap fits most of the aftermarket gas tanks and has a shut off valve on it.
This tap fits most of the aftermarket gas tanks and has a shut off valve on it. One trick we've come up with is to find a small 1" piece of tubing to fit tight in the end of the tap that goes into the tank. This way it won't pick up fuel off the bottom of the tank.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 62010718C6
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 6201551
This filler top was used a lot on the old Manx style fiberglass buggies.
Application:Part #: 113919049D
The sending unit registers the fuel level on the gauge.
Application:Part #: 131298221
This pipe comes out of the bottom of your gas tank.
Application:Part #: 62010718E5
End Fill 8x24" Polished Stainless Steel Gas Tank
Application:Part #: 113201075ABX
These are new Brazilian tanks.
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 113201157
Fuel Breather "T"
Application:Part #: 62010718E9
End Fill 10x30" Polished Stainless Steel Gas Tank
Application:Part #: 111809905D
Fuel Filler Door
Application:Part #: 113201635
Fuel Tank Clamp
Application:Part #: 111201261
Fuel Breather Hose Clip
Application:Part #: 6201550B
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 6201549
Replacement Gas Tank Bung and Cap
Application:
This tap fits most of the aftermarket gas tanks and has a shut off valve on it.