Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The sending unit registers the fuel level on the gauge.
The sending unit registers the fuel level on the gauge. There were two types, mechanical for Bugs up to 1967 and electrical for Bugs 1968 and on. There is no such thing as 6v or 12v electrical sending units, as they have a floating ground. Before replacing the electrical unit, take the wire off of it and hold it to ground (a bolt or metal on the body). CAUTION: WHENEVER WORKING AROUND LIVE WIRES AND GAS BE VERY, VERY CAREFUL. Turn the key on. If the gauge goes to full, the sending unit is bad. If it doesn't, the gauge and or the vibrator is bad.
Bug (Type 1): 68-78
Ghia: 73-74
Thing: 73-74
Race/Off-Road: 68-
No customer reviews for the moment.
Part #: 113919049C
The sending unit registers the fuel level on the gauge.
Application:Part #: 620107210SS
Replacement Stainless Steel Fuel Tank Brackets 10" Diameter
Application:Part #: 803201511E
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 6201552
This cover bolts onto the body of the car allowing you to cover up something, usually the gas filler.
Application:Part #: 113201215
This is a small rubber sleeve that goes on the neck of the gas tank before you slide the fuel filler hose on..
Application:Part #: 62010718E9
End Fill 10x30" Polished Stainless Steel Gas Tank
Application:Part #: 62010718C5
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 6201550B
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 141201122
Gas Tank Breather Tube Sleeve
Application:Part #: 113201075AD
These are new Brazilian tanks.
Application:Part #: 6201549
Replacement Gas Tank Bung and Cap
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 62010718E5
End Fill 8x24" Polished Stainless Steel Gas Tank
Application:Part #: 62010718E7
End Fill 10x24" Polished Stainless Steel Gas Tank
Application:Part #: 6201221
This tap fits most of the aftermarket gas tanks and has a shut off valve on it.
Application:
The sending unit registers the fuel level on the gauge.
