Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The heater hose goes from the fan shroud to the heater boxes.
The heater hose goes from the fan shroud to the heater boxes. Will need to be cut to length. 25mm
No customer reviews for the moment.
Part #: 043255105F
These are your source of heat.
Application:Part #: 133711717B
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 131711741A
Heater Control Knob, Red
Application:Part #: 043255106G
These are your source of heat.
Application:Part #: 111819189B
Heater Vent, Plastic, LH
Application:Part #: 043298147A
The heater cable hooks to the heater box levers and they work the flaps in the heater boxes..
Application:Part #: 111298101A
This kit contains a barrel bolt and bracket that hook to the control levers.
Application:Part #: 111711000
Heat Control Kit
Application:Part #: 111255416F
Bakelite Heater Tube, Right
Application:Part #: 111501159B
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 131711741B
This knob fits on the heater control.
Application:Part #: 111819945
Heater Hose to Body Seal
Application:Part #: 111819190
Right hand Floor heater Vent Cover
Application:Part #: 113119519G
This elbow helps reduce icing issues for those of you living in cold climates.
Application:Part #: 113119585
These seals go over the stock H pipes where they come through the front pulley tin.
Application:
The heater hose goes from the fan shroud to the heater boxes.
