Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Pre-Heat Tube Clip, 2 Required
Pre-Heat Tube Clip, 2 Required
Bug (Type 1): 40 HP-1500
Bus (Type 2): 40 HP-1500
Ghia: 40 HP-1500
No customer reviews for the moment.
Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: N144111
Some of the most common studs you might need.
Application:Part #: 1721555
Universal Throttle Cable
Application:Part #: 211847495W
Safari Rivet with Flex Washer
Application:Part #: 2805002BK
This mounts the tire onto the front of the bus getting it out of the interior.
Application:Part #: 211611047CGR
Rear Wheel Brake Cylinder, GERMAN
Application:Part #: 6821510
High Mount Baja Bars, 3/4" tube, High mount is approximately half way up Quarter Panel
Application:Part #: 221809101E
Complete Left Side Panel NO SHIPPING!!!
Application:Part #: 2805002WH
This mounts the tire onto the front of the bus getting it out of the interior.
Application:Part #: 1129720
Intake Gasket for CB's Competition Eliminator Cylinder Heads or super flow.
Application:Part #: 221847105A
New replacement pop out window frames. Mild Steel
Application:Part #: 111498001
Front axle lock plate kit
Application:Part #: 3256091
Also called J-tubes, these tubes fit most header systems and replace the stock heater boxes, so you will lose your heat and defroster..
Application:Part #: 211809187
Side Strengthening Panel 1.9 meters long (74.8")
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:
Pre-Heat Tube Clip, 2 Required