Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These seals go over the stock H pipes where they come through the front pulley tin.
These seals go over the stock H pipes where they come through the front pulley tin. They help to seal the engine compartment from hot air and dirt.
Bug (Type 1): 68-79
Bus (Type 2): 68-71
Ghia: 68-74
Thing (Type 5): 73-74
No customer reviews for the moment.
Part #: 133819365
Fresh Air Hose
Application:Part #: 151819189A
Heater Vent, Plastic, Convertible
Application:Part #: 113255355B
This is the hose that goes from the body to the engine.
Application:Part #: 111801177
Heater Channel Rubber Valve, 4 required, each
Application:Part #: 113255292AAL
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 113255737
Pre-Heat Tube Clip, 2 Required
Application:Part #: 111711000
Heat Control Kit
Application:Part #: 131711665
Heater Lever Stop Plate (Pair)
Application:Part #: 043255105G
These are your source of heat.
Application:Part #: 111711749A
Heater Lever Bushing Kit, Set of 4
Application:Part #: 043255106G
These are your source of heat.
Application:Part #: 113255355C
This is the hose that goes from the body to the engine.
Application:Part #: 043255355A
This is the hose that goes from the body to the engine.
Application:Part #: 113819723A
This is the front defroster hose under the hood.
Application:
These seals go over the stock H pipes where they come through the front pulley tin.
