Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These kits are really thick and have a great fitting hood.
These kits are really thick and have a great fitting hood. The rule of thumb is to measure twice, cut once and cut long. You can always trim more off. You should mount the fenders and the front hood before cutting, this will give you an idea where to start. Kits come with wide fenders or narrow fenders. A narrow fender is just like the wide but with the outer lip cut off. Hoods and kits have to be shipped by truck.
Off-Road: All
No customer reviews for the moment.
Part #: 113131617A
This is a smog device.
Application:Part #: 1101157
This cam plug is made out of billet alluminum and has an o-ring on it.
Application:Part #: 211945241A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: N177191
These are some of the fuses and bulbs that you might need.
Application:Part #: 111701263
This bushing wraps around the front shift rod.
Application:Part #: 141881377
This is the padding that sits on top of the springs of the seat.
Application:Part #: 1105251ALBK
Aluminum Stock Crankshaft Pulley Black
Application:Part #: 311853587B
These are the clips that hold the various chrome moldings on.
Application:Part #: 1941002
H4 headlights are a lot brighter than the stock headlight and the bulb is removable from the lens.
Application:Part #: 221847081C
These are the latches that hold the popout frame out.
Application:Part #: 113823731BGR
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 1615111
Rear Disc Brake Kit With E-Brake, 5x130 w/ 14x1.5mm threads or 5x4.75" w/ 12mm threads, Swing Axle
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application:Part #: 113853355B
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113857637ABK
This cover hides the screws on the assist straps.
Application:
These kits are really thick and have a great fitting hood.