Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These carpet kits are to be used with the original rubber floor mats.
These carpet kits are to be used with the original rubber floor mats. The part numbers are just the basic numbers so you will need to tell us what color you want and what kind of material. There are three styles to choose from; loop, cut pile, and square weave. Brought to you proudly by TMI. Note: Buy a can of 3M spray adhesive. Pay attention when using this. Once it is stuck that's it. **Please call for current prices**
Bug (Type 1): 58-68
No customer reviews for the moment.
Part #: 113881479B
These are the cover plates that go on the bottom of the seat frame..
Application:Part #: 111863107GY
Rubber Firewall Mat, Gray
Application:Part #: 311301265BFA
Transmission mount, Front
Application:Part #: 6703113B
The offset hole location of the padding allows it to be positioned to provide more protection where you want it.
Application:Part #: 111863401
This is a full carpet kit.
Application:Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 211829221A
Rear Hatch Striker Plate
Application:Part #: N110071
Some of the more common nuts you might need..
Application:Part #: 2847431
Side Weld in Tabs For Rear Safari
Application:Bus (Type 2); 55-79
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 211945351A
This plastic bulb holder fits on the side in the rear..
Application:Part #: 2109003
Cam Gear Bolt Kit (5)
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 311133241
Intake manifold Boot Sleeves Set of 4
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:
These carpet kits are to be used with the original rubber floor mats.
