Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the cap that goes on the outside of the drum; covering up your bearing.
This is the cap that goes on the outside of the drum; covering up your bearing. The cap on the driver's side has a square hole in it for the speedometer cable.
No customer reviews for the moment.
Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 1141024
These are hardend bolts, 10.9 instead of the stock 8.8.
Application:Part #: 1498050A
Press in Link Pin Bushings 7/8" (Set of 4)
Application:Part #: 6415064
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 111837502F
This is the mechanism that makes the window go up and down.
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 113863111
These are the interior panels.
Application:Part #: N203741
We only carry metric hose.
Application:Part #: 1601112
These are studs and nuts for different types of wheels.
Application:Part #: 2405645
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end.
Application:Part #: 6611010A
22mm Polished/Chrome Buggy Master Cylinder w/o Residual Valve
Application:Part #: 311945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 113845321FCL
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 1821531S
There are two styles of stainless steel running boards, smooth and louvered.
Application:Part #: 111837658A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:
This is the cap that goes on the outside of the drum; covering up your bearing.
