Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the tube that goes through the fan shroud that the accelerator cable threads through.
This is the tube that goes through the fan shroud that the accelerator cable threads through. We usually put a 10mm flat washer on it, then stick it through the shroud. On the backside of the shroud, use a fuel line hose clamp on the tube to keep it from pulling back through the shroud.
Bug (Type 1): 28PIC
Bus (Type 2): 28PIC
Ghia: 28PIC
No customer reviews for the moment.
Part #: 211129893
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 113129909
This is the clip for the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 113129901
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 131609237C
These four shoes or linings are in the front drums and are sold on an exchange basis.
Application:Part #: 1615117SWG
Rear Disc Brake Kit With E Brake, Blank (undrilled) Rotors, Swing Axle, HD Brackets
Application:Part #: 151867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: N120141
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 211405421B
Used link pin bearing
Application:Part #: 1198090A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 6601041
Offroad Wheel, 15"x6.5", 5x205 bolt pattern
Application:Part #: 1805057
This tray mounts behind the rear seat.
Application:Part #: 113863110
These are the interior panels.
Application:Part #: 6721555
If you feel you need to shorten your throttle cable, you can cut it and add this piece to get you to the correct length.
Application:Part #: 211801401
Cargo Door Lock Rod Plate Reinforcement
Application:Part #: 61296144BK
IDF air cleaner shield.
Application:Offroad; All
Part #: 111953041A
This is the whole unit, lens and bulb holder.
Application:Part #: 6823499
These fasteners take some time to put in, but they're worth the effort. Flat Long Tab
Application:
This is the tube that goes through the fan shroud that the accelerator cable threads through.
