Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These joints are located in the ends of the control arms.
These joints are located in the ends of the control arms. You will need to remove the spindles to replace these boots. There are four ball joints per bus. Sold each
No customer reviews for the moment.
Part #: 1800101
This is a "no frills", plain chrome license plate frame..
Application:Part #: 115875395
Sunroof Mechanism Female Screw
Application:Part #: 151837658
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 133957809A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 1405671
These aluminum nuts are fashioned after the ball joint style nut.
Application:Part #: 113819448
This is the crescent shaped grill that goes behind the quarter windows.
Application:Part #: 211415802D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 261813164A
This is what the battery sits on.
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 6823495
These fasteners take some time to put in, but they're worth the effort. Formed Tab w/ 5/16"-24 Nutplate
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 144863713
This is a full carpet kit.
Application:
These joints are located in the ends of the control arms.