Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These joints are located in the ends of the control arms.
These joints are located in the ends of the control arms. You will need a press and some special tools to replace the joints on a standard Bug. Note: Remove the boot before you press the joint in the arm and then put it back on after. There are four ball joints per car on a standard Bug. Super Beetle ball joints just bolt on and there is only one per side.
Vanagon: 80-
No customer reviews for the moment.
Part #: 111881365
This is the padding that sits on top of the springs of the seat.
Application:Part #: 113415813
These are the ball joints on the tie rods.
Application:Part #: 211955225C
Safari wiper pivots
Application:Part #: 2847491HSK
These kits are designed to replace the straight slide supports on Bus front and small rear safari windows.
Application:Part #: 113819719A
These are the vents that clip into the dash.
Application:Part #: 211817539
Inner Roof Strength Panel 2.5 Meters (98")
Application:Part #: 211703523
Heater Cable Tube 2775mm
Application:Part #: 111405671
This nut holds the front drum on.
Application:Part #: 1198162A
These rings are cast iron.
Application:Part #: 111141723A
Return Spring For Cross Shaft
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 211703125
This support goes from the main frame out to the inner rocker.
Application:Part #: 7105401CU
We’ve teamed up with Neil & Parks to create a new Rod & Cap option for anyone running a Pauter “Big Block VW”. The Aluminum rod is made by MGP, and we are custom cutting the rod and cap to achieve a self-centering “cracking” application. These caps clear everything in a Pauter block.
Application:
These joints are located in the ends of the control arms.
