Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Rear Bumper Overrider, Right
Rear Bumper Overrider, Right
Bus (Type 2): 59-67
No customer reviews for the moment.
Part #: 1721556
Oops, I missed it by that much! This will add 1" to your cable length.
Application:Part #: 1251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 181405371C
These joints are located in the ends of the control arms.
Application:Part #: 111947111E
A dome light comes in handy when trying to find that missing piece of clothing.
Application:Part #: 1711176
This coupler joins the shift rods.
Application:Part #: 211501331BKT
This joint allows the axle to move up and down and turn on IRS cars.
Application:Part #: 111971109
The electrical harness runs everything on the car.
Application:Part #: 803419775b
Steering shaft bushing for lower pivot
Application:Part #: 1109002
Premium Performance Aftermarket Cam Gear
Application:Part #: 111701433
Battery Clamp For 12 volt applications
Application:Part #: 1615107WW
Willwood Rear Disc Brake Caliper Only
Application:Part #: 411813225
This seal goes between the body and the engine.
Application:Part #: 1823021
This is a dress-up kit for the front and rear air intakes on your bug..
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 6251022
Buggy Dual Exhaust with Chrome Tips, Without Heater Box
Application: