Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the front door handles.
These are the front door handles. They come with keys. To get your old one off peel back the rubber around the door latch and you should see a phillips head screw(s). Remove the screw(s) and push the handle back towards the front of the car and it will fall off. On buses 1964-1967 you will need to pull off the door panel and use an allen wrench to remove the handle.
Bug (Type 1): 64-65
Race/Off-Road: 64-65
No customer reviews for the moment.
Part #: 6801107CH
Seat Mounting Tab, Chromoly Set of 4
Application:Part #: 1601156
Castle-Design Hubcap, fits 5 Lug Wheels up to 1965
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 113611053CH
Rear Wheel Brake Cylinder CHINA
Application:Part #: 1109624
These springs are made for high RPM engines.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 113141701E
This shaft holds the throw-out bearing in place.
Application:Part #: 211837235ABK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1105273BR
Lightened 12 lb.
Application:Part #: 151801131B
These are the replacement rails for convertibles.
Application:Part #: 111198031
36 HP Oil Change Kit
Application:Part #: 141971117
The electrical harness runs everything on the car.
Application:Part #: N134251
Vent Window Latch Plate Rivets, Mount Latch Plate to Door Frame, Pair
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 343201551C
Locking Gas Cap
Application:
These are the front door handles.