Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Wheel Bearing Thrust Washer
Wheel Bearing Thrust Washer
No customer reviews for the moment.
Part #: 113415061E
If you have a lot of play in the steering don't just assume the steering box is bad.
Application:Part #: 1109460
These shims are used under the rockers to set the geometry.
Application:Part #: 112701062K
Floor Plate, Right
Application:Part #: 113837205D
These are the front door handles.
Application:Part #: 6721355RD
Clutch Slave cylinder billet
Application:Part #: 6415616A
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: 113823531G
This the cable you pull to release the front hood.
Application:Part #: 111711141BK
This is the knob on top of the shifter..
Application:Part #: 1837581
These window cranks and door handles are made of aluminum.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 141863706
This is a full carpet kit.
Application:Part #: 151871032
This is the outer skin on your convertible.
Application:Part #: 211809101F
This is the most common place for rust on your bus.
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
Wheel Bearing Thrust Washer