Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This large soft plug is on the back side of reduction boxes with the 46mm axle nut.
This large soft plug is on the back side of reduction boxes with the 46mm axle nut. A good way to remove this plug without ruining it, is to tack weld a nut to the plug and screw a slide hammer into the nut. Use the slide hammer to remove the plug. Grind off the tack weld and the plug is reusable. To seal the plug, we drive them in and use a bead of 3M glue around the outside, let it dry and your good to go.
No customer reviews for the moment.
Part #: 1109626
These springs are made for high RPM engines.
Application:Part #: 224845321CL
These window seals are on buses 1968 on.
Application:Part #: 1070275K
Deck Lid Rack Knock Down Style
Application:Part #: 1105720
Chevy Rod Bearings STD
Application:Part #: 211837277
These wedges align the door so the door latch and striker line up as you close the door.
Application:Part #: 211598200A
Spring Plate Cover Hardware Kit
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 1837235BIL
Billet Door Handle Buffer Rings, Set of 4
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 211698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211829155
Rear Hatch Rod Bolt
Application:Part #: 1800100F
This is a copy of the original EMPI license plate frame made years ago.
Application:Part #: 211945363B
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 113857553
Mount Rod for Right Visor
Application:Part #: ECX25B95
14-16 Gauge Female Spade w/ Male Spade Piggy Back
Application:Part #: 113881633E
This knob and guide allows you to release the back of the front seat.
Application:
This large soft plug is on the back side of reduction boxes with the 46mm axle nut.