Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
This piece of tin goes behind the engine towards the flywheel and screws down to the cylinder tins. The doghouse tin has a hole in the back of it for the ducting tin to fit into. The non dog house tin does not have the ducting hole. This tin has a large hole for a 40 bus pre heat tube. If your not running this tube plug that large hole.
No customer reviews for the moment.
Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 311119317A
These are also known as the "forget-me-nots".
Application:Part #: 043119351B
Heater Channel Tin Left
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119431CH
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119528CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
