Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Some of the most common studs you might need.
Some of the most common studs you might need. The best way to get a stud in or out is to double nut it. Take one nut and tighten it against the other and screw the stud in or out.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111867500
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 133415801
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application:Part #: 133701571
Front inspection seal
Application:Part #: 281837709
This is the channel that the front door windows roll up into.
Application:Part #: 211401273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 113953021F
Semiphore, 12 Volts, New, Each
Application:Part #: 211845101E
These are cut from safety glass as required by law.
Application:Part #: 111809905D
Fuel Filler Door
Application:Part #: 6501263
These stub axles will convert your CV joints to Bus or 930 joints.
Application:Part #: 1707135ACH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 311819467
These are the little vents near the rear window to keep it from fogging up.
Application:Part #: 1129033
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 211703491A
Rear valance inner support
Application:Part #: 1711175
This coupler joins the shift rods.
Application:Part #: 091301189A
Transmission to drive flange seal. Left or right
Application:
Some of the most common studs you might need.