Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam. They allow the spindle to move up and down. The only way you can check yours is to tear them out of the spindle. Once you have them out look for pits in the pin, outer race and bearing. Count your shims and make sure you have 8 per pin. The reason you don't see 1963 listed is on a 63 it is one or the other. 1955-1962 is a 20mm pin and 1964-1967 is a 22mm pin. You will also see here good used parts as well.
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 211837295B
Front Door Striker Plate, Left, 3 hole mount
Application:Part #: 221845305A
New replacement glass for pop out window frames.
Application:Part #: 2711098PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 111867170WH
This allows you to pull the front doors closed and rest your arm when driving..
Application:Part #: 1601103A
Screw in Wheel Studs M14-1.5 commonly found in 5x130 applications
Application:Part #: 111837685
Vent wing tension clamp, each
Application:Part #: 6501331H
Porsche Style 930 CV Joint 108mm OD, .875" Balls, CHINA
Application:Part #: 113425021J
This little shock goes from the steering box to the frame.
Application:Part #: 113251163D
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 111711611GY
This knob fits on the heater control.
Application:Part #: 6415811C
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 7/8"-14 LH
Application:Part #: N109801
This is a list of the most common screws you might need..
Application:Part #: 6501205IRS
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 6411106
Thru Rod, Stock Width Beam, 40.5" Long, Boxed
Application:Part #: 133971020
The electrical harness runs everything on the car.
Application:Part #: 6129650596BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
