Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the knob on top of the shifter..
This is the knob on top of the shifter.
Bug (Type 1): 61-67
Ghia: 61-67
Off-Road: 61-67
No customer reviews for the moment.
Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 6905821
Sealed Momentary Push Button Starter Switch
Application:Part #: 6501503
This kit is made to weld onto your stock arms to beef them up.
Application:Part #: 211809187
Side Strengthening Panel 1.9 meters long (74.8")
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 113953163
Turn Signal Chrome Housing, Each
Application:Part #: 2885804CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1601109
These are studs and nuts for different types of wheels.
Application:Part #: 6301150A
Type 2 Transmission Center Mount Only
Application:Part #: 311853535B
Chrome Aluminum Molding Kit, 8 Piece without Side Marker
Application:Part #: 113881633E
This knob and guide allows you to release the back of the front seat.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113845521AAM
This seal is for the rear window.
Application:Part #: 111863412
This carpets the area behind the rear seat.
Application:Part #: 111101461
These nuts and washers hold the heads on.
Application:
This is the knob on top of the shifter..
