Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 63
No customer reviews for the moment.
Part #: 133807425
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 133807397
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 111701535A
Accelerator Pedal Bracket
Application:Part #: 151871449E
This bow goes into the metal frame of the rear window.
Application:Part #: 241877223
Sunroof Seal Kit, Felt, Front and Rear
Application:Part #: 211405521B
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 1601027PL
These are the most popular five lug mags wheels.
Application:Part #: 113611053
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 113898016
Door Handles and Ignition Switch matching 2 keys
Application:Part #: 1955441BIL
Billet Radio Knobs, Push-on, Pair
Application:Part #: 113501283CH
Inner Rear Wheel Bearing CHINA
Application:Part #: 6129650476BL
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 141561411
Beautiful Classic Dark Wood with Polished chrome Spokes, Thin Grip
Application:Part #: 211405627
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 117877365A
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 113857219A
These are the clips that hold the various chrome moldings on. Sold each
Application:Bug (Type 1); Chrome molding seal 1950-1966, Door panel clip seal All
Ghia; All
Type 3; All
Off road: All