Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a core charge, but due to the core shortage on these we need you to send in your old cores first. So this number does not apply anymore.
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 1941115CB
Headlight lens "Cibie" Style
Application:Part #: 02086
These are the parts found in the distributor.
Application:Part #: 111905449A
These seals keep dirt out and air flowing over the cylinders on your shrouds.
Application:Part #: 111405273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: 113867506
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 021198573
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 211837235AIV
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: JC21500
Jaycee Oil Filter Bracket, Black
Application:Part #: 211847515
This latch screws onto the safari window latching it closed.
Application:Part #: 1101351
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 022101361C
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1105402
I-Beam Rod, 5.500", VW Journal 2.165"/55mm (EMPI 3/8" Rod Bolts), Set of 4
Application:Part #: 021198009B
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 2301149
Replacement Rubber mounts for Bus mid mount
Application:Bus (Type 2); 56-67
This is a core charge, but due to the core shortage on these we need you to send in your old cores first. So this number does not apply anymore.
