Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These spindles have reconditioned king pins and are ready to bolt back on. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. If you would like to order these before sending your old arms in, please add part number 211498041BWG to your order. That is the core charge. Once you send back your old spindles we will refund that amount, providing your spindles are good.
These spindles have reconditioned king pins and are ready to bolt back on. They are sold in pairs (on an exchange basis) and they come with instructions on how to pull them off and put them back on. To check yours jack up the front of the car. Grab the top and bottom of the tire and rock it back and forth. If you see or feel movement then they are worn. On Bus spindles they only come with the king pins reconditioned. The reason for that is most of the time your link pins are good. On Bugs they come with both king pins and link pins reconditioned.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 63
No customer reviews for the moment.
Part #: 211817851
Air Distribution Knob Spring Washer
Application:Part #: 151871409B
Rear Bow Base Seal for Convertible Top
Application:Part #: 211867571WH
Headliner Pinch Welt (Beading), Off-white
Application:Part #: 211615108ACO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 211813417
D Post Inner Section, 370mm (14.56"), Left
Application:Part #: 113425021
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: 113863709
This is a full carpet kit.
Application:Part #: 113707311B
This is what gets smashed up first in an accident.
Application:Part #: 211809500
Dog leg Bracket fits both sides
Application:Part #: 113105245FRS
Rear Main Seal, Double Lipped
Application:Part #: 311853589
These are the clips that hold the various chrome moldings on.
Application:Part #: 1501205IRS
Now you can dial in your suspension in an instant.
Application:Part #: 3129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 111837475
The front door window rolls up and down between these two rubber seals.
Application:Part #: 1401300B
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 111809085B
Rear Bumper Mount, Left
Application:
These spindles have reconditioned king pins and are ready to bolt back on. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. If you would like to order these before sending your old arms in, please add part number 211498041BWG to your order. That is the core charge. Once you send back your old spindles we will refund that amount, providing your spindles are good.